Quantitative control technology of two component glue in aut
作者:涂胶机 日期:2020-04-09 10:28 浏览:
Glue quantitative control is the basic requirement of a full-automatic dispenser. Why should we take it out? In fact, there are differences between single component and two component. Due to the requirements of glue viscosity and use mode, the quantitative control requirements will be particularly high. First, the problem of poor fluidity needs to be solved, and then the mixing requirements need to be solved before quantitative control can be done. Today, we will talk about the quantitative control of two component glue of glue filling machine.
Two component glue has high viscosity and low viscosity. Take the glue used for filling adult products as an example to talk about the quantitative control requirements. Silica gel is used for filling adult products. Generally, the viscosity of silica gel is relatively thick, which has an impact on the glue output. In terms of the installation of pressure bucket, our company uses a liquid level display pressure bucket with automatic glue adding function, while the dispensing valve uses a dynamic double liquid dispensing valve, With automatic mixing function, speed up glue fusion and improve glue filling effect.
There is also a crucial accessory for quantitative control of adult product dispenser, metering gear pump, which is used to measure the output effect of glue. Two component glue is divided into a glue and B glue. The output of two glue is different. A glue may be 5 and B glue may be 1. The metering pump can output glue water accurately. The fully automatic dispenser with two components will be equipped basically. Quantitative control It needs accessories, which can accurately control the filling amount of adult supplies and avoid the glue ratio failing to meet the requirements.
The installation of pressure barrel is only to improve the use degree of glue, and it is sustainable and convenient to use. The liquid level display pressure barrel is more used for glue storage and continuous output. For example, 25 kg glue may be used for filling adult products a day, without pressure barrel, and glue water needs to be added frequently, which will delay the effect.
Do you know the quantitative control of glue? Cost supplies glue filling machine is only one of the various types of equipment, for glue control needs to be determined according to the actual situation, if your company has such requirements, you can contact our company Oh!